EBC Brake Pad Set CFA493R – High Friction Red Grade for Electric Bikes

£15.99

The perfect all-round performance brake pad upgrade for Electric Bikes,  offering a powerful, progressive feel with excellent durability and rotor-friendly wear.

Out of stock

SKU: EMXS-BRK-00001 Categories: , Product Brand:

Description

The EBC CFA493R Red Grade brake pads are the perfect balance of performance and durability for your Sur-Ron or Talaria. When you need confident, predictable braking that lasts, without the aggressive rotor wear of a full sintered pad, the CFA493R is the answer.

Stock brake pads on high-performance e-bikes like the Sur-Ron and Talaria are often a compromise, designed for casual use, not for riders who push the limits. They can fade under pressure, offer a vague lever feel, and wear out quickly, leaving you with a dangerous lack of confidence when you need it most.

These EBC CFA493R brake pads are not just replacement pads — they are a statement of intent. Engineered in the UK by EBC Brakes, a world leader in braking technology, the CFA493R pads feature a high-friction semi-sintered aramid fiber compound.

This delivers a powerful, progressive braking feel with excellent heat resistance, giving you the confidence to brake later and harder, while being kinder to your rotors than a full sintered pad. They are the choice for riders who want a significant performance upgrade with extended pad life.

Here is your three-step plan to unlocking superior braking performance:

  1. Order Your EBC Red Pads: Add the EBC CFA493R Red Grade Brake Pads to your basket. This is the ideal all-round performance upgrade for your Sur-Ron or Talaria.
  2. Install with Ease: These pads are a direct replacement for the stock pads in Sur-Ron and Talaria OEM brake calipers. The installation is a straightforward bolt-off, bolt-on process that can be done in minutes with basic tools.
  3. Ride with Enhanced Control: Feel the immediate difference in power, modulation, and control. Brake later, ride harder, and tackle any terrain knowing your EBC CFA493R brake pads will perform flawlessly, every single time.

Technical Specification

FeatureSpecification
BrandEBC Brakes
ModelCFA493R
Part NumberEBC-CFA493R
GradeRed (High-Friction Semi-Sintered)
CompoundAramid fiber composite
BackplateCarbon-steel
Use CaseDownhill, Trail, Enduro
Heat ResistanceHigh
LifespanMedium–Long
Bed-in TimeMedium

Compatibility

BikeCompatible ModelsRecommended Rotor Size
Sur-RonLight Bee X203mm / 220mm
TalariaSting203mm / 220mm

Brake Pad Performance Comparison

MetricStock PadsEBC GreenEBC Red CFA493REBC HH
Initial Bite3/54/55/55/5
Fade Resistance2/53/54/55/5
Modulation4/55/54/53/5
Durability3/52/54/55/5
Wet Performance3/53/54/55/5
Noise Level4/55/53/52/5
Rotor Friendliness4/55/54/53/5

Performance Charts

EBC CFA493R Brake Pads — Frequently Asked Questions

1. What makes the Red grade different from Green or HH?

EBC Red (CFA493R) is a semi-sintered aramid fiber pad, offering a balance between the powerful bite of a sintered pad and the excellent feel of an organic pad. It has higher heat tolerance and a longer life than Green, but with better modulation and less noise than the full HH sintered pads.

2. Are these suitable for wet and muddy conditions?

Yes, the semi-sintered compound performs consistently in wet and muddy conditions, offering reliable stopping power when organic pads might start to fade or lose effectiveness.

3. Will these pads wear my rotors faster than stock pads?

The EBC Red pads are designed to be rotor-friendly and will not cause excessive wear on standard stainless steel rotors. Their wear rate is comparable to or better than many stock pads.

4. How much noise do these pads make?

As a semi-sintered pad, they may produce slightly more noise than a soft organic pad, but they are generally much quieter than fully sintered (HH) pads. Any noise is usually minimal and only noticeable in certain conditions.

5. What is the bed-in process for these pads?

Perform 10–12 hard stops from a moderate speed on a clean, flat surface. This transfers an even layer of pad material to the rotor for optimal performance. Avoid dragging the brakes during this period.

6. Can I use EBC Red pads on both front and rear brakes?

Yes, the CFA493R is compatible with both front and rear brake callipers on the Sur-Ron Light Bee X and Talaria Sting, giving you a consistent and balanced braking performance across both axles.

7. How do EBC Red pads compare to the stock pads on a Sur-Ron?

Stock Sur-Ron pads are a basic organic compound offering adequate stopping power for casual riding. The EBC Red pads provide noticeably stronger initial bite, better heat resistance, and significantly improved performance in wet conditions, making them a worthwhile upgrade for any rider who pushes their bike hard.

8. Are these pads suitable for racing?

The EBC Red grade is well-suited to enduro, trail racing, and competitive riding where a balance of power, feel, and durability is needed. For extreme downhill racing where maximum heat resistance is the priority, the EBC HH (CFA493HH) would be the preferred choice.

9. Do I need to replace my rotors when fitting new brake pads?

You do not need to replace your rotors unless they are worn below the minimum thickness, warped, or heavily scored. It is always recommended to fit new pads onto a clean, smooth rotor surface for the best results and to avoid contaminating the new pads.

10. Where are EBC brake pads manufactured?

EBC Brakes are manufactured in the United Kingdom. EBC is one of the world’s leading aftermarket brake pad manufacturers, with over 40 years of experience producing pads for motorcycles, bicycles, and performance vehicles.

Further Reading & Useful Resources

The following resources provide additional technical information and manufacturer guidance relevant to the EBC CFA493R brake pads and compatible electric bikes.

Additional information

Weight 250 kg
Colour