Brake Service
Reliable stopping power you can trust.
£
00.00
+ Parts
-
Inspection & Adjustment
-
Cables, Hoses & Hydraulics
-
Component Service
-
Other
Book A Service
Power Control Confidence
Drivetrain Service
Smooth shifts. Less wear. Better rides.
£
00.00
+ Parts
-
Inspection & Adjustment
-
Chain, Cassette & Crankset
-
Cleaning & Lubrication
-
Bottom Bracket & Bearings
-
Component Replacement
-
Other
Book A Service
Optimised Shifting Efficiency
Wheel Service
Straight Wheels. Smooth Rides.
£
00.00
+ Parts
-
Inspection & Assessment
-
Truing & Tensioning
-
Hub, Axle & Freehub Service
-
Tyre, Tubes & Tubeless
-
Component Replacement
-
Other
Book A Service
Improved Wheel Strength
Cockpit Service
Comfort, control, at your fingertips.
£
00.00
+ Parts
-
Inspection & Adjustment
-
Headset Service
-
Grips, Bar Tape
-
Cables, Hoses & Routing
-
Component Replacement
-
Other
Book A Service
Precise Controls For Comfort
Frame Service
A solid foundation for confident riding.
£
00.00
+ Parts
-
Frame Inspection
-
Alignment Checks
-
Hardware, Threads & Mounts
-
Safety & Structural Assessment
-
Other
Book A Service
Structural Checks For Strength
Suspension Service
Control where it matters most.
£
00.00
+ Parts
-
Inspection & Assessment
-
Fork Lower-Leg Service
-
Rear Shock Air Can Service
-
Pivot Bearing & Hardware
-
Setup & Adjustment
-
Other
Book A Service
Optimised For Performance
Bearing Service
Restoring smooth, friction-free.
£
00.00
+ Parts
-
Inspection & Assessment
-
Hub Bearings
-
Bottom Bracket Bearings
-
Headset Bearings
-
Suspension Pivot Bearings
-
Bearings Replacement
-
Other
Book A Service
Smooth Rotation For Efficiency
Inspection & Adjustment
Brake system inspected for safe operation and performance.
Brake leavers inspected for function, reach, return, and pivot condition.
Brake calliper inspected for alignment, secure mounting, and wear.
Brake pads inspected for wear, contamination, and correct fit.
Brake rotors inspected for wear, thickness, heat damage, and condition.
Rotor trueness inspected and corrected where possible.
Cables, Hoses & Hydraulics
Brake hoses inspected for wear, damage, leaks, routing, and securement.
Brake hose fittings and connections inspected for leaks and security.
Mechanical brake cables inspected for fraying, corrosion, and smooth operation.
Hydraulic brake system inspected for pressure consistency and leaks.
Hydraulic brake bleed performed (front & rear) where required or requested.
Brake hose replacement available; includes installation and bleed (quoted separately).
Component Service
Brake calipers cleaned and aligned.
Brake pistons cleaned, lubricated, and reset.
Brake pads replaced where requested (parts additional unless specified).
Brake rotors replaced where requested (parts additional unless specified).
Other
Final brake performance and safety verification completed prior to test ride.
Our Drivetrain Service is designed to restore smooth, precise shifting and maximise the efficiency of your bike. We thoroughly inspect and tune the gears, derailleurs, shifters, chain, cassette, and crankset to ensure everything works in perfect harmony. The drivetrain is carefully cleaned to remove built-up dirt and contamination, then lubricated with the correct products to reduce friction and component wear. Worn parts are identified early, with replacement options available where required, helping to prevent costly damage down the line. Every service is completed with a final function check under load, so your bike leaves the workshop running quietly, efficiently, and reliably on every ride.
Inspection & Adjustment
Drivetrain inspected for wear, damage, alignment, and smooth operation.
Gears indexed, aligned, and tuned for accurate shifting.
Shifters inspected for function, return, and engagement.
Front and rear derailleurs inspected for wear, alignment, and secure mounting.
Derailleur hanger alignment checked and corrected as required.
Chain, Cassette & Crankset
Chain inspected for wear and stretch.
Cassette inspected for wear, tooth damage, and engagement.
Chain replacement available where required or requested (parts additional).Cassette replacement available where required or requested (parts additional).
Crankset and chainrings inspected for wear, damage, and secure installation.
Pedals inspected for smooth rotation and secure fit.
Cleaning & Lubrication
Drivetrain components cleaned to remove dirt, grease, and contamination.
Chain cleaned and lubricated with appropriate lubricant.
Cassette and chainrings cleaned manually or ultrasonically (where applicable).
Derailleurs cleaned and lubricated at pivot points.
Bottom Bracket & Bearings
Bottom bracket inspected for play, noise, and smooth rotation.
Bottom bracket serviced or replaced where required (where serviceable; parts additional).
Crank interface inspected and reinstalled to specification.
Component Replacement (Optional)
Chain replacement.
Cassette replacement.
Chainring replacement.
Bottom bracket replacement.
(All replacement parts quoted separately unless specified.)
Other
Final drivetrain function check performed under load.
Our Wheels Service ensures your wheels run true, smooth, and reliable in all riding conditions. We carry out a full inspection of rims, spokes, hubs, axles, and wheel retention systems to check for wear, damage, and correct engagement. Wheels are professionally trued and spoke tension balanced to improve strength, stability, and ride quality. Hub bearings and freehub systems are inspected and serviced where applicable to ensure smooth rotation and dependable engagement. Tyres, inner tubes, and tubeless systems are checked and refreshed as required, with replacement options available if needed. Every service is completed with a final alignment and safety check, giving you confidence that your wheels are ready for the road or trail.
Inspection & Assessment
Wheels inspected for trueness, dish, roundness, and overall condition.
Rims inspected for wear, damage, cracks, and brake track condition (where applicable).
Spokes and nipples inspected for damage, corrosion, and even tension.
Hubs inspected for smooth rotation, play, and bearing condition.
Axles and wheel retention systems inspected for secure engagement.
Truing & Tensioning
Wheel truing performed (minor or major; lateral and radial).
Spoke tension measured and balanced.
Wheel dish checked and corrected as required.
Hub, Axle & Freehub Service
Hub bearings inspected for wear and smooth operation.
Cup-and-cone hub bearings serviced and adjusted where applicable.
Sealed hub bearings inspected; replaced where required (parts additional).
Axle condition inspected; bearing preload set and verified.
Freehub body inspected for function and engagement.
Freehub body cleaned, serviced, and lubricated.
Tyre, Tubes & Tubeless
Tyres inspected for wear, cuts, and sidewall damage.
Inner tubes inspected and replaced where required (parts additional).
Tyre and inner tube replacement available.
Tubeless system setup or refresh performed.
Tubeless valves, tape, and sealant inspected and serviced as required.
Component Replacement (Optional)
Wheel bearing replacement.
Freehub body replacement.
Axle replacement
Tyre and inner tube replacement.
(All replacement parts quoted separately unless specified.)
Other
Final wheel alignment, rotation, and safety check completed prior to release.
Our Cockpit & Controllers Service ensures your bike’s controls are safe, comfortable, and operating smoothly. Handlebars, stem, headset, shifters, and brake levers are inspected and adjusted for correct alignment, secure installation, and rider comfort, while headset preload and bearings are checked for smooth, precise steering. Grips or bar tape, cables, and hoses are inspected for wear, proper routing, and smooth function, with all controls function-tested and aligned during a final safety check to ensure confident control on every ride.
Inspection & Adjustment
Cockpit components inspected for damage, wear, and secure installation.
Handlebars inspected for cracks, deformation, and correct positioning.
Stem inspected for wear; alignment checked and torque verified to specification.
Headset inspected for play, binding, and smooth operation.
Shifter and brake lever position adjusted for rider comfort and control.
Control reach and lever engagement adjusted where applicable.
Headset Service
Headset adjusted for correct preload and smooth rotation.
Headset bearings inspected for wear and contamination.
Headset cleaned, regreased, and reset where serviceable.
Headset bearing replacement available where required (parts additional).
Grips, Bar Tape & Contact Points
Grips or bar tape inspected for wear and security.
Grip or bar tape replacement available (standard options included; upgrades optional).
Bar end plugs inspected and secured.
Cables, Hoses & Routing
Gear cables inspected for fraying, corrosion, and smooth operation.
Brake cables inspected for wear and secure routing (mechanical systems).
Hydraulic hoses inspected for wear, damage, routing, and securement.
Cable and hose routing inspected for correct length, movement, and frame protection.
Cable and hose replacement available where required (quoted separately).
Controls reindexed and function-tested after cable or hose work.
Component Replacement (Optional)
Grip or bar tape replacement.
Gear cable replacement.
Brake cable replacement.
Hydraulic hose replacement.
(All replacement parts quoted separately unless specified.)
Other
Final cockpit alignment, control function, and safety check completed prior to release.
Our Frame & Alignment Service ensures your bike’s foundation is straight, secure, and safe to ride. The frame and fork are thoroughly inspected for cracks, dents, deformation, and damage, with particular attention to high-stress areas and welds. Alignment checks are carried out to confirm straight tracking, correct dropout and derailleur hanger alignment, and proper wheel positioning. All frame hardware, mounts, and threads are inspected and torqued to specification, with disc brake and accessory mounts checked for secure fitment. The service is completed with a comprehensive structural and safety assessment, giving you confidence in the integrity and alignment of your bike.
Frame Inspection
Frame inspected for cracks, dents, deformation, and visible damage.
High-stress areas inspected (head tube, bottom bracket, chain stays, seat stays, welds/junctions).
Frame alignment visually assessed for tracking and symmetry issues.
Fork inspected for damage, straightness, and correct alignment
Alignment Checks
Rear dropout alignment inspected and corrected where possible.
Derailleur hanger alignment checked and corrected using alignment gauge.
Frame and fork alignment checked to ensure straight tracking and proper wheel alignment.
Hardware, Threads & Mounts
All accessible frame mounting points inspected for damage or wear.
Frame hardware inspected and torqued to manufacturer specification.
Threads inspected for damage or contamination.
Disc brake mounts inspected for alignment and secure mounting.
Accessory mounts (bottle cages, racks, guards) inspected where fitted.
Safety & Structural Assessment
Comprehensive bolt torque and safety check performed.
Frame integrity assessed for continued safe use.
Post-crash inspection performed, including focused assessment of impact areas.
Technician feedback provided on any safety concerns or recommended next steps.
Other
Final alignment and safety verification completed prior to release.
Our Suspension Service is designed to keep your bike smooth, controlled, and performing at its best on every ride. Front and rear suspension components are inspected for leaks, wear, damage, and consistent operation, with fork stanchions, seals, bushings, and mounting hardware checked for condition and play. Fork lower legs and rear shock air cans are serviced, cleaned, and lubricated to manufacturer specifications to restore smooth movement and reliability. Suspension pivot bearings and hardware are inspected and torqued correctly, with replacement options available if required. The service is completed with suspension setup and adjustment for rider weight and preference, followed by a final function and safety check to ensure confident, predictable performance on the trail.
Inspection & Assessment
Front and rear suspension inspected for damage, leaks, wear, and smooth operation.
Fork stanchions inspected for scratches, wear, and seal condition.
Rear shock inspected for air loss, damping consistency, and mounting hardware condition.
Suspension bushings, mounts, and hardware inspected for play and wear.
Fork Lower-Leg Service
Fork lower legs removed and serviced.
Lower-leg internals cleaned and inspected.
Dust seals and foam rings cleaned and lubricated.
Fresh suspension lubricant installed to manufacturer specification.
Fork reassembled and function-tested.
Rear Shock Air Can Service
Rear shock air can removed and serviced.
Air can seals inspected, cleaned, and lubricated.
Air can reassembled and pressure restored to specification.
(Does not include full damper rebuild unless quoted separately.)
Pivot Bearing & Hardware
Suspension pivot bearings inspected for play and smooth operation.
Pivot hardware inspected for wear or damage.
Suspension pivot bolts torqued to manufacturer specification.
Pivot bearing replacement available where required (parts additional).
Setup & Adjustment
Suspension air pressure set for rider weight.
Sag measured and adjusted front and rear.
Rebound and compression settings adjusted to baseline or rider preference.
Rider setup guidance provided where applicable.
Other
Final suspension function and safety check completed prior to release.
Test ride performed to confirm correct suspension operation.
Our Bearing Service ensures all critical rotating components on your bike run smoothly, quietly, and efficiently. Hub, bottom bracket, headset, and suspension pivot bearings are inspected for wear, contamination, corrosion, play, and correct preload, with noise and rotational resistance carefully assessed. Where serviceable, bearings are cleaned, regreased, and correctly adjusted; worn or damaged bearings are replaced as required to manufacturer specification. Axles and hardware are inspected and torqued correctly to ensure proper alignment and long-term reliability. Every service is finished with a final function and safety check, giving you confidence in smooth performance and dependable durability on every ride.
Inspection & Assessment
Bearings inspected for wear, contamination, corrosion, play, and smooth operation.
Bearing preload and alignment assessed where applicable.
Noise, roughness, and rotational resistance evaluated.
Hub Bearings
Hub bearings inspected for smooth rotation and correct preload.
Cup-and-cone hub bearings cleaned, regreased, and adjusted where serviceable.
Sealed hub bearings inspected and replaced where required (parts additional).
Axle condition inspected; bearing preload set and verified.
Bottom Bracket Bearings
Bottom bracket bearings inspected for play, noise, and smooth rotation.
Bottom bracket removed where required for inspection.
Bearings cleaned and regreased where serviceable.
Bottom bracket bearing replacement available where required (parts additional).
Bottom bracket reinstalled and torqued to manufacturer specification.
Headset Bearings
Headset inspected for play, binding, and smooth rotation.
Headset bearings removed, cleaned, and regreased where serviceable.
Headset bearing replacement available where required (parts additional).
Headset reassembled and adjusted for correct preload and alignment.
Suspension Pivot Bearings
Suspension pivot bearings inspected for play, binding, and smooth movement.
Pivot bearings removed, cleaned, and regreased where serviceable.
Pivot bearing replacement available where required (parts additional).
Suspension hardware reinstalled and torqued to specification.
Bearing Replacement (Where Required)
Bearing replacement performed where wear or damage is identified.
Replacement bearings installed to manufacturer specification.
All replaced bearings quoted separately unless specified.
Other
Final bearing function, preload, and safety check completed prior to release.
Test ride performed to confirm smooth operation and noise-free performance.
